|
FOR CHEMICAL
EMERGENCY - Spill, Leak, Fire, Exposure or Accident -
CALL INFOTRAC
Day or Night - 1-800-535-5053 OUTSIDE THE UNITED STATES CALL COLLECT 1-352-323-3500 |
Proud to support I-CAR® |
 |
 |
|
|
AUTOMOTIVE ABRASIVES |
|
|
 |
TRIM-KUT®
ABRASIVES DISCS
The Trim-Kut®
Abrasive Disc is a versatile tool used for grinding, sanding, cleaning and
general surface preparation in Autobody Repair. It can be used for
rust/paint removal, leveling welded seams and MIG-weld residue removal.
Trim-Kut® Abrasive Discs are a unique one-piece design, with
the grinding surface bonded to a hard copolymer backing. It is a highly
durable grinding unit that will not fly off during use and eliminates the
need for additional backing pads. The disc can be trimmed when the outside
edge has been sufficiently “loaded” to the point where it is not grinding
effectively. By simply placing the back of the disc against a sharp edge
or object, and with activation of the electric/air tool, the “loaded”
portion on the outside edge can be removed from the rest of the disc
creating a new edge ready for use. Trim-Kut® Abrasive Discs can
be trimmed in such a manner right up to the mandrel.
Each box of 25 Trim-Kut® Abrasive Discs comes with 1 mandrel.
WARNING: MAXIMUM OPERATING SPEED FOR A 3" DISC IS 21,000 RPM.
WARNING: MAXIMUM OPERATING SPEED FOR A 5" DISC IS 12,000 RPM.
PART NO.
7050
DESC:
3" 120 grit
(Green)
Packaged:
25 Per Case
PART NO.
7055
DESC:
3" 60 grit
(Orange) Packaged:
25 Per Case
PART NO.
7060
DESC:
3" 36 grit
(Red) Packaged:
25 Per Case
PART NO.
7065
DESC:
3" 24 grit (Black) Packaged:
25 Per Case
PART NO.
7085
DESC:
5" 36 grit Packaged:
25 Per Case
PART NO.
7090
DESC:
5" 24 grit
Packaged:
25 Per Case
Additional Photos
 |
|
back
to top é |
|
|
|
|
|
|
MANDRELS FOR TRIM-KUT® ABRASIVES DISCS
PART NO.
7070
DESC:
1/4" Mandrel Packaged:
1 Per Pkg
PART NO.
7073
DESC:
7/16-20 Mandrel Packaged:
1 Per Pkg |
|
back
to top é |
|
|
|
|
|
|
ZIRCONIUM CUT-OFF WHEELS
A special blend of zirconium
grain is used to avoid overheating, glazing and discoloration. Used
for finishing applications, smooth cutting and burr-free finish.
Easily cuts sheet metal, tubes, pipes, etc. Fast cutting. Long
lasting, high quality. Applications: Stainless Steel, Hard Ferrous
Metals, Ferrous Metals.
Diameter: 3”
Center Hole: 3/8”
Thickness: 1/32” (.035) and 1/16”
WARNING: MAXIMUM OPERATING SPEED FOR THE 3” DISC IS 25,000 RPM
WARNING: MAXIMUM OPERATING SPEED FOR THE 4” DISC IS 19,000 RPM
PART NO.
6999
DESC:
3" x 1/32" x 3/8" Packaged:
10 Per Pkg
PART NO.
6999-100
DESC:
3" x 1/32" x 3/8" Packaged:
100 Per Pkg
PART NO.
7000
DESC:
3" x 1/16" x 3/8" Packaged:
10 Per Pkg
PART NO.
7000-100
DESC:
3" x 1/16" x 3/8" Packaged:
100 Per Pkg
PART NO.
7004
DESC:
4" x 1/16" x 3/8" Packaged:
5 Per Pkg
PART NO.
7004-50
DESC:
4" x 1/16" x 3/8" Packaged:
50 Per Pkg
PART NO.
7001
DESC:
Arbor
(1/4" Shank) Packaged:
1 Per Pkg |
| back
to top é |
|
|
|
|
|
|
WELD
GRINDING WHEELS
Externally reinforced cutting
and grinding wheel. For notching, bending, freehand cutting in hard to
reach areas. Also for grinding down spot welds. For use in automotive,
aerospace industries and plant maintenance. Reinforced to resist lateral
pressure. Long lasting, high quality. Applications: Stainless Steel,
Ferrous Metals.
Diameter: 3”
Center Hole: 3/8”
Thickness: 1/4”
WARNING: MAXIMUM OPERATING SPEED FOR THIS 3” DISC IS 20,300 RPM
PART NO.
7002
DESC:
3" x 1/4" x 3/8" Packaged:
5 Per Pkg
PART NO.
7002-50
DESC:
3" x 1/4" x 3/8" Packaged:
50 Per Pkg
PART NO.
7001
DESC:
Arbor
(1/4" Shank) Packaged:
1 Per Pkg |
|
back
to top é |
|
|
|
|
|
|
HAND
SCUFF PADS
A non-woven synthetic fibre,
coated with abrasive and bonded together with a special abrasive system.
Maroon - Medium, for scuffing
Gray - Fine. for final sanding
PART NO.
7180
DESC:
Maroon - medium Packaged:
20 Per Pkg
PART NO.
7185
DESC:
Gray - Fine
Packaged:
20 Per Pkg |
|
back
to top é |
|
|
|
|
|
|
|
|
|
© International
Epoxies & Sealers
P.O. Box 185 San Antonio, FL 33576 |
mail@internationalepoxies.com |
