Welcome to International Epoxies & Sealers!
Manufacturers of INTER-MIX, INTER-FOAM & INTER-WELD

INTER-MIX™  |   INTER-FOAM™  |  INTER-WELD™  |  Products  |  Contact  |  Home          APPLICATION GUIDE

MSDS / TECHNICAL INFO

FOR CHEMICAL EMERGENCY - Spill, Leak, Fire, Exposure or Accident - CALL INFOTRAC
Day or Night - 1-800-535-5053  OUTSIDE THE UNITED STATES   CALL COLLECT 1-352-323-3500

Proud to support I-CAR®
INTER-FOAM™    (Set and Cure Times are based at 75° F, relative humidity)

INTER-FOAM 5sec  FLEXIBLE FOAM

A two part flexible urethane foam formulated to expand up to 10 times its original volume. Used to stop wind noise and water leaks in pillar posts. Adds reinforcement to panels. Stops panel flutter. Provided sound deadening. Our automatic mixing system eliminates errors which are common in manual mixing. Dispenses with any IES 300mL cartridge applicator gun.

Expands in 5 to 10 seconds
Handling strength in 2 to 3 minutes
Duplicates OEM Foams
Paintable
Excellent Memory - Compresses up to 55% of it's expanded size

WORKING TIME:  3 - 5 SECONDS                                           HANDLING TIME:  2 - 3 MIN.
SANDABLE TIME:  NOT APPLICABLE                                    FULL CURE:  10 - 15 MIN.
PAINTABLE TIME:  10 - 15 MIN


PART NO.  
8451               SIZE:  10 fl. oz. kit (300mL) - comes with 2 static mixers             Packaged:  4 Per Case
PART NO.  
8449               SIZE:  50 mL Kit - comes with 1 static mixer &                               Packaged:  6 Per Case
                                                                                   
        one hand dispenser 

back to top é

CLICK FOR MSDS    

INTER-FOAM 10sec  RIGID FOAM

A two part expandable rigid urethane foam formulated to fill and reinforce pillar posts and box sections. Expands up to 10 times its original volume. Also stops wind, water and dust leaks. Eliminates panel flutter on cross members and provides sound deadening and compressive strength. Our automatic mixing system eliminates errors which are common in manual mixing. Dispenses with any IES 300mL cartridge applicator gun.

Expands in 10 to 25 seconds
Tack free in 3 - 4 minutes
Cures in less than 1 hour
Compressive Strength 170 PSI
Density: 5.5 - 6.5 lbs. per cubic foot
Paintable and sets up hard

WORKING TIME:  10 - 25 SECONDS                                      HANDLING TIME:  3 - 4 MIN.
SANDABLE TIME:  NOT APPLICABLE                                    FULL CURE:  30 - 45 MIN.
PAINTABLE TIME:  10 - 15 MIN


PART NO.  
8455               SIZE:  10 fl. oz. kit (300mL) - comes with 2 static mixers             Packaged:  4 Per Case

back to top é

CLICK FOR MSDS    
 

© International Epoxies & Sealers
P.O. Box 185  San Antonio, FL 33576

mail@internationalepoxies.com