International Epoxies & Sealers
30241 Commerce Drive
San Antonio, FL 33576
Phone: (800) 451-7206
Fax: (866) 239-0328

8271

LARGE BEAD SPREADER NOZZLE USE WITH #8406 1/BX

For use with #8406 Bead It Sound Deadener & Seam Sealer. Nozzle dispenses 5 beads (thick or thin depending on speed of application) of adhesive in a 2-3/4" spread. The nozzle and neck lock together to prevent accidental separation. Tongue and groove edge construction and internal dams prevent side leakage. Removable screws allow nozzle to be opened for cleaning. Two-piece yellow plastic construction.

(approx. bead: 5/16 inch)

TDS 

8261

1/2 RIBBON ZIP TIP  10/BX

For use with #8260 screw-on typa static mixing nozzles.

  • PART NO:  8261
  • SIZE: 1/2" Ribbon Zip-Tip
  • Packaged:  10/BX
  • PART NO:  8262
  • SIZE: 1" Ribbon Zip-Tip
  • Packaged:  10/BX
  • PART NO:  8266
  • SIZE: 1/2" Half-Round Zip-Tip
  • Packaged:  10/BX
  • PART NO:  8267
  • SIZE: 1" Half-Round Zip-Tip
  • Packaged:  10/BX



8262

1 RIBBON ZIP-TIP  10/BX

For use with #8260 screw-on typa static mixing nozzles.

  • PART NO:  8261
  • SIZE: 1/2" Ribbon Zip-Tip
  • Packaged:  10/BX
  • PART NO:  8262
  • SIZE: 1" Ribbon Zip-Tip
  • Packaged:  10/BX
  • PART NO:  8266
  • SIZE: 1/2" Half-Round Zip-Tip
  • Packaged:  10/BX
  • PART NO:  8267
  • SIZE: 1" Half-Round Zip-Tip
  • Packaged:  10/BX



8265

3/8 X 24 SQ MIXER FOR #8422  10/BX

For use with screw-on style cartridges. Compatible with Zip- Tips. (#8260 is round, #8265 is square)

  • PART NO:  8260
  • SIZE: 3/8" ID x 18 elements
  • Packaged:  10/BX
  • PART NO:  8260-1000
  • SIZE: 3/8" ID x 18 elements
  • Packaged:  1000/BX
  • PART NO:  8265
  • SIZE: 3/8" ID x 24 elements
  • Packaged:  10/BX
  • PART NO:  8265-1000
  • SIZE: 3/8" ID x 24 elements
  • Packaged:  1000/BX


8273

LARGE & SMALL BEAD SPREADER NOZZLE KIT 1/BX

A kit that includes one each of our popular spreader nozzles.

  • PART NO:  8273
  • SIZE: Large and Small Bead Spreader Kit
  • Packaged:  1/BX

TDS 

8265-1000

3/8 X 24 SQ MIXER FOR #8422  1000/BX

For use with screw-on style cartridges. Compatible with Zip- Tips. (#8260 is round, #8265 is square)

  • PART NO:  8260
  • SIZE: 3/8" ID x 18 elements
  • Packaged:  10/BX
  • PART NO:  8260-1000
  • SIZE: 3/8" ID x 18 elements
  • Packaged:  1000/BX
  • PART NO:  8265
  • SIZE: 3/8" ID x 24 elements
  • Packaged:  10/BX
  • PART NO:  8265-1000
  • SIZE: 3/8" ID x 24 elements
  • Packaged:  1000/BX


8266

1/2 HALF ROUND ZIP-TIP  10/BX

For use with #8260 screw-on typa static mixing nozzles.

  • PART NO:  8261
  • SIZE: 1/2" Ribbon Zip-Tip
  • Packaged:  10/BX
  • PART NO:  8262
  • SIZE: 1" Ribbon Zip-Tip
  • Packaged:  10/BX
  • PART NO:  8266
  • SIZE: 1/2" Half-Round Zip-Tip
  • Packaged:  10/BX
  • PART NO:  8267
  • SIZE: 1" Half-Round Zip-Tip
  • Packaged:  10/BX



8267

1 HALF ROUND ZIP-TIP  10/BX

For use with #8260 screw-on typa static mixing nozzles.

  • PART NO:  8261
  • SIZE: 1/2" Ribbon Zip-Tip
  • Packaged:  10/BX
  • PART NO:  8262
  • SIZE: 1" Ribbon Zip-Tip
  • Packaged:  10/BX
  • PART NO:  8266
  • SIZE: 1/2" Half-Round Zip-Tip
  • Packaged:  10/BX
  • PART NO:  8267
  • SIZE: 1" Half-Round Zip-Tip
  • Packaged:  10/BX



8270

SMALL BEAD SPREADER NOZZLE USE WITH #8406 1/BX

For use with #8406 Bead It Sound Deadener & Seam Sealer. Nozzle dispenses 11 beads (thick or thin depending on speed of application) of adhesive in a 2-3/4" spread. The nozzle and neck lock together to prevent accidental separation. Tongue and groove edge construction and internal dams prevent side leakage. Removable screws allow nozzle to be opened for cleaning. Two-piece yellow plastic construction.

(approx. bead: 3/16 inch)

TDS 

8221

3/8 X 24 SQ MIXER FOR #8423  10/BX

For use with 225ml and 300l dual cartridge products that require a separate nut.

  • #8221, #8250, #8253 & #8254 are compatible with Zip-Tips
  • #8252 are oversized and are not compatible with Zip-Tips
  • #8250, #8253 & #8252 mixers are round
  • #8254 are used with INTER-FOAM products #8451 & #8455
  • #8221 are used with #8423 Hybrid Panel Bonding Adhesive
  • PART NO:  8250
  • SIZE:  3/8" ID x 18 elements, Round
  • Packaged:  10/BX
  • PART NO:  8253
  • SIZE:  3/8" ID x 24 elements, Round
  • Packaged:  10/BX
  • PART NO:  8221
  • SIZE:  3/8" ID x 24 elements, Square
  • Packaged:  10/BX
  • PART NO:  8254
  • SIZE:  3/8" ID x 36 elements, Square
  • Packaged:  10/BX
  • PART NO:  8252
  • SIZE:  1/2" ID x 18 elements, Round
  • Packaged:  10/BX


8249

STATIC MIXER FOR #8449 FOAM  10/BX

Square mixing nozzle for use with 50ml cartridges. These mixing tips are NOT compatible with ZIP-Tips.

  • PART NO:  8249
  • SIZE: 1/4" ID x 20 elements
  • Packaged:  10/BX
  • PART NO:  8249-50
  • SIZE: 1/4" ID x 20 elements
  • Packaged:  50/BX



8260

3/8ID X 18 SCREW ON STATIC MIXER 10/BX

Optimizing mix performance in a 20% shorter length than comparable square mixers, our new square static mixers allow the user to get even closer to their applications. Patent-pending design includes material flow path and wedge element improvements. This allows it to deliver improved mix quality in a significantly short length - the shortest of its kind in the marketplace. The shorter length allows users to dispense materials with greater control, resulting higher job quality. Compatible with ZIP-Tips.

  • Improved mixing in a shorter length!
  • 30% less retained volume resulting in reduced waste
  • Improves adhesive bond strength


  • PART NO:  8260
  • SIZE: 3/8" ID x 25 elements
  • Packaged:  10/BX
  • PART NO:  8260-100
  • SIZE: 3/8" ID x 25 elements
  • Packaged:  100/BX
  • PART NO:  8260-1000
  • SIZE: 3/8" ID x 25 elements
  • Packaged:  1000/BX


TDS 

8254

3/8ID X 36 SQUARE STATIC MIXER  10/BX

For use with 225ml and 300l dual cartridge products that require a separate nut.

  • #8221, #8250, #8253 & #8254 are compatible with Zip-Tips
  • #8252 are oversized and are not compatible with Zip-Tips
  • #8250, #8253 & #8252 mixers are round
  • #8254 are used with INTER-FOAM products #8451 & #8455
  • #8221 are used with #8423 Hybrid Panel Bonding Adhesive
  • PART NO:  8250
  • SIZE:  3/8" ID x 18 elements, Round
  • Packaged:  10/BX
  • PART NO:  8253
  • SIZE:  3/8" ID x 24 elements, Round
  • Packaged:  10/BX
  • PART NO:  8221
  • SIZE:  3/8" ID x 24 elements, Square
  • Packaged:  10/BX
  • PART NO:  8254
  • SIZE:  3/8" ID x 36 elements, Square
  • Packaged:  10/BX
  • PART NO:  8252
  • SIZE:  1/2" ID x 18 elements, Round
  • Packaged:  10/BX


8260-1000

3/8ID X 18 SCREW ON MIXER  1000/BX

Optimizing mix performance in a 20% shorter length than comparable square mixers, our new square static mixers allow the user to get even closer to their applications. Patent-pending design includes material flow path and wedge element improvements. This allows it to deliver improved mix quality in a significantly short length - the shortest of its kind in the marketplace. The shorter length allows users to dispense materials with greater control, resulting higher job quality. Compatible with ZIP-Tips.

  • Improved mixing in a shorter length!
  • 30% less retained volume resulting in reduced waste
  • Improves adhesive bond strength


  • PART NO:  8260
  • SIZE: 3/8" ID x 25 elements
  • Packaged:  10/BX
  • PART NO:  8260-100
  • SIZE: 3/8" ID x 25 elements
  • Packaged:  100/BX
  • PART NO:  8260-1000
  • SIZE: 3/8" ID x 25 elements
  • Packaged:  1000/BX


TDS 

8260-100

3/8ID X 18 SCREW ON MIXER  100/BX

Optimizing mix performance in a 20% shorter length than comparable square mixers, our new square static mixers allow the user to get even closer to their applications. Patent-pending design includes material flow path and wedge element improvements. This allows it to deliver improved mix quality in a significantly short length - the shortest of its kind in the marketplace. The shorter length allows users to dispense materials with greater control, resulting higher job quality. Compatible with ZIP-Tips.

  • Improved mixing in a shorter length!
  • 30% less retained volume resulting in reduced waste
  • Improves adhesive bond strength


  • PART NO:  8260
  • SIZE: 3/8" ID x 25 elements
  • Packaged:  10/BX
  • PART NO:  8260-100
  • SIZE: 3/8" ID x 25 elements
  • Packaged:  100/BX
  • PART NO:  8260-1000
  • SIZE: 3/8" ID x 25 elements
  • Packaged:  1000/BX


TDS 

8217

3/8ID X 17 SCREW ON MIXER  10/BX

Optimizing mix performance in a 20% shorter length than comparable square mixers, our new square static mixers allow the user to get even closer to their applications. Patent-pending design includes material flow path and wedge element improvements. This allows it to deliver improved mix quality in a significantly short length - the shortest of its kind in the marketplace. The shorter length allows users to dispense materials with greater control, resulting higher job quality.

  • Improved mixing in a shorter length!
  • 30% less retained volume resulting in reduced waste
  • Improves adhesive bond strength


    • PART NO:  8217
    • SIZE:  3/8" ID x 17 elements
    • Packaged:  10/BX


    TDS 

97190

TAPERED SQUARE SPREADERS BLACK 100/BX

Mixing spreaders with tapered edges gives mor flexibility to work with IES repair products. Producrs greater control and precision. Tapered on all four sides.


  • PART NO:  97190
  • SIZE: 2-3/4" x 4" Black Square Spreader
  • Packaged:  100/BX