Page 13 - IES_ Catalog 2019.indd

PLASTIC REPAIR

ULTRA-FINE TEXTURE COATING BLACK SPECIALTY ADHESIVE REMOVER
A fast-drying "ultra-fine" texture coating that has excellent An extra strength, fast acting virgin solvent used for removing
adhesion. Blendable to a variety of both interior and exterior epoxies, urethanes and silicones. Will not leave an oily
textures. Used on bumpers, step plates, mirrors, side residue. Non-staining. Fast drying. Contains no Chlorinated
mouldings, impact strips, dash/trim panels, etc. ULTRA- Solvents or CFC'S! Meets California & OTC regulations!
FINE is not UV resistant and must be top coated. Matches
OEM finish. Paintable in 30-60 minutes. Free of PVC's and
Isocyanates! 1780 32 oz. can 12/Box
4780 24 oz. aerosol can 12/Box
4522 20 oz. aerosol can 12/Box Net Weight 17 oz.
Net Weight 16.25 oz.

SUPER CLEANING SOLVENT SUPER CLEAN 2
A quick, safe, multi-purpose virgin solvent. Excellent for Waterborne Plastic Prep Anti-Static!
removing silicone wax, adhesives, tar, undercoating, IES Super Clean 2 is a water based cleaner and paint prep
sealers, paint overspray and bugs. Safe on most fully cured all in one! Suitable for cleaning metal (including aluminum
paints, fabric, vinyl, glass and most plastics. Non-staining. and galvanized), old paint finishes, transport coatings,
Film free. Contains no Chlorinated Solvents or CFC'S. primers, glass, fiberglass and plastics. Removes dirt, bugs,
Does not meet California & OTC regulations. sanding dust, grease, finger prints, salt, soap rests, silicone,
etc.. Improves adhesion before applying primers, paints,
4700 24 oz. aerosol can 12/Box coatings, and adhesives. Eliminates static! NOTE: Not
Net Weight 16 oz. recommended to remove tar or glue. 50 State Compliant!
1700 32 fl. oz. can 12/Box
1701 1 gallon can 4/Box 1790 quart 6/Box
1702 5 gallon pail 1/Box 1791 gallon 4/Box
1792 5 gallon 1/Box

QUICK-WELD #1 QUICK-WELD #2
A low viscosity, water thin cyanoacrylate adhesive. Used A high viscosity (thicker), cyanoacrylate adhesive. Used to Plastic Repair
mainly for bonding close fitting parts or where penetration bond irregular surfaces or when gap filling requirements are
is needed. Used on grilles, knobs, mouldings, emblems and needed. Used on grilles, knobs, mouldings, emblems and
countless other automotive plastic parts. Cures to a shear countless other automotive plastic parts. Cures to a shear
strength of 1400-3625 psi depending on the substrate. strength of 1400-3625 psi depending on the substrate.
612 CLEAR 1 fl. oz. bottle 4/Box 622 CLEAR 1 fl. oz. bottle 4/Box

QUICK-WELD #3 - Rubber Toughened! QUICK SET ACTIVATOR
High viscosity (thicker) combined with high temperature Used to activate QUICK-WELD adhesives or other instant
resistance and excellent resistance to peel and shock loads. adhesives. Can also be used to prime one of the mating
Specifically formulated to bond various rubbers, metals, surfaces to insure a successful bond. Can also be used to
wood and plastics. For use in challenging environments. spray over a bonded area for a quick set.
Cures to a shear strength of 1885-3625 psi depending on
the substrate. 650 4 fl. oz. spray pump bottle 4/Box
625 BLACK 1 fl. oz. bottle 4/Box
FIBERGLASS BODY REPAIR TAPE
A fiberglass mesh tape with a high-tack adhesive on one side
for easy positioning. Used with epoxy repair compounds to
QUICK-WELD ADHESIVE KIT give additional strength and support.
An excellent cyanoacrylate repair adhesive kit for most
plastics, urethane, SMC and fiberglass. Used on grilles, 70528 1-7/8" wide x 150 ft. roll 4/Box
knobs, mouldings, emblems and countless other automotive
plastic parts.

Includes: 1 QUICK-WELD #1, 1 QUICK-WELD #2, 1 QUICK-SET ALUMINUM FOIL BODY REPAIR TAPE
ACTIVATOR Ideal for reinforcing parts to be repaired when using epoxy
repair compounds. Special "high-tack" adhesive.
631 6 fl. oz. Quick-Weld kit 4/Box
70525 2" wide x 50 ft. roll 4/Box

10