International Epoxies & Sealers30241 Commerce Drive
San Antonio, FL 33576
Phone: (800) 451-7206
Fax: (866) 239-0328
International Epoxies & Sealers
Cobalt Assortment includes 5 - 8mm bits and 5 - 10mm bits.
Now you can have the drill bit you need - when you need it!
Made in the U.S.A!
Kit includes:
A premium quality spot weld drill bit designed to remove spot welds from
sheet metal by drilling through the outside panel with little or no damage to
the inside panel.
Self-centered shallow point
Includes a Titanium and CarboNitride (TiCN coating for
increased durability.
For increased drill bit life, use with IES #12020 Boron Buster!
Assortment contains:
1-6mm, 3-8mm & 1-10mm Spot Weld Bits
A very popular replacement bit for some pneumatic spot weld removal tools. Top quality.
The 1.49" has a .44 Flat On Shank
The 1.69" has a .75 Flat On Shank
A very popular replacement bit for some pneumatic spot weld removal tools. Top quality.
The 1.49" has a .44 Flat On Shank
The 1.69" has a .75 Flat On Shank
A very popular replacement bit for some pneumatic spot weld removal tools. Top quality.
The 1.49" has a .44 Flat On Shank
The 1.69" has a .75 Flat On Shank
A premium quality spot weld bit designed to remove spot welds from sheet metal by drilling through the outside panel with little or no damage to the inside panel. Eliminates pilot hole. 135° self-centered split point. Made of Super Cobalt steel. Performs best at low RPM. Cuts extremely fast.
A premium quality spot weld bit designed to remove spot welds from sheet metal by drilling through the outside panel with little or no damage to the inside panel. Eliminates pilot hole. 135° self-centered split point. Made of Super Cobalt steel. Performs best at low RPM. Cuts extremely fast.
A premium quality spot weld bit designed to remove spot welds from sheet metal by drilling through the outside panel with little or no damage to the inside panel. Eliminates pilot hole. 135° self-centered split point. Made of Super Cobalt steel. Performs best at low RPM. Cuts extremely fast.
A premium quality spot weld bit designed to remove spot welds from sheet metal by drilling through the outside panel with little or no damage to the inside panel. Eliminates pilot hole. 135° self-centered split point. Made of Super Cobalt steel. Performs best at low RPM. Cuts extremely fast.
A premium quality spot weld bit designed to remove spot welds from sheet metal by drilling through the outside panel with little or no damage to the inside panel. Eliminates pilot hole. 135° self-centered split point. Made of Super Cobalt steel. Performs best at low RPM. Cuts extremely fast.
A premium quality spot weld bit designed to remove spot welds from sheet metal by drilling through the outside panel with little or no damage to the inside panel. Eliminates pilot hole. 135° self-centered split point. Made of Super Cobalt steel. Performs best at low RPM. Cuts extremely fast.
A very popular replacement bit for some pneumatic spot weld removal tools. Top quality.
The 1.49" has a .44 Flat On Shank
The 1.69" has a .75 Flat On Shank
A very popular replacement bit for some pneumatic spot weld removal tools. Top quality.
The 1.49" has a .44 Flat On Shank
The 1.69" has a .75 Flat On Shank
A very popular replacement bit for some pneumatic spot weld removal tools. Top quality.
The 1.49" has a .44 Flat On Shank
The 1.69" has a .75 Flat On Shank
A premium quality spot weld bit designed to remove spot welds from sheet metal by drilling through the outside panel with little or no damage to the inside panel. Eliminates pilot hole. 135° self-centered split point. Made of Super Cobalt steel. Performs best at low RPM. Cuts extremely fast.
A premium quality spot weld bit designed to remove spot welds from sheet metal by drilling through the outside panel with little or no damage to the inside panel. Eliminates pilot hole. 135° self-centered split point. Made of Super Cobalt steel. Performs best at low RPM. Cuts extremely fast.
A premium quality spot weld bit designed to remove spot welds from sheet metal by drilling through the outside panel with little or no damage to the inside panel. Eliminates pilot hole. 135° self-centered split point. Made of Super Cobalt steel. Performs best at low RPM. Cuts extremely fast.
A premium quality spot weld bit designed to remove spot welds from sheet metal by drilling through the outside panel with little or no damage to the inside panel. Eliminates pilot hole. 135° self-centered split point. Made of Super Cobalt steel. Performs best at low RPM. Cuts extremely fast.
A premium quality spot weld bit designed to remove spot welds from sheet metal by drilling through the outside panel with little or no damage to the inside panel. Eliminates pilot hole. 135° self-centered split point. Made of Super M7 High Speed steel. Performs best at low RPM. Cuts extremely fast.
A premium quality spot weld bit designed to remove spot welds from sheet metal by drilling through the outside panel with little or no damage to the inside panel. Eliminates pilot hole. 135° self-centered split point. Made of Super M7 High Speed steel. Performs best at low RPM. Cuts extremely fast.
A premium quality spot weld bit designed to remove spot welds from sheet metal by drilling through the outside panel with little or no damage to the inside panel. Eliminates pilot hole. 135° self-centered split point. Made of Super M7 High Speed steel. Performs best at low RPM. Cuts extremely fast.
A premium quality spot weld bit designed to remove spot welds from sheet metal by drilling through the outside panel with little or no damage to the inside panel. Eliminates pilot hole. 135° self-centered split point. Made of Super M7 High Speed steel. Performs best at low RPM. Cuts extremely fast.
A premium quality spot weld bit designed to remove spot welds from sheet metal by drilling through the outside panel with little or no damage to the inside panel. Eliminates pilot hole. 135° self-centered split point. Made of Super M7 High Speed steel. Performs best at low RPM. Cuts extremely fast.
A premium quality spot weld bit designed to remove spot welds from sheet metal by drilling through the outside panel with little or no damage to the inside panel. Eliminates pilot hole. 135° self-centered split point. Made of Super M7 High Speed steel. Performs best at low RPM. Cuts extremely fast.
A premium quality spot weld bit designed to remove spot welds from sheet metal by drilling through the outside panel with little or no damage to the inside panel. Eliminates pilot hole. 135° self-centered split point. Made of Super M7 High Speed steel. Performs best at low RPM. Cuts extremely fast.
A premium quality spot weld bit designed to remove spot welds from sheet metal by drilling through the outside panel with little or no damage to the inside panel. Eliminates pilot hole. 135° self-centered split point. Made of Super M7 High Speed steel. Performs best at low RPM. Cuts extremely fast.
Finally, a drill bit designed to cut spot welds from Boron Steel! The Boron Buster Carbide
Spotweld Bit has an AlTiN coating (Aluminum Titanium Nitride) that creates a protective layer
that keeps its hardness at higher temperatures and also improves lubricity. Tools coated in AlTiN
typically last 3 - 10 times longer than uncoated tools. Comes with a "Tri-Flute" head and a .750 flat
on the shank that can be used in most conventional electric and pneumatic drills.
Carbide bits are brittle and may break due to the angle, pressure and speed being exerted by
the operator. We will not warranty broken bits.
A premium quality spot weld bit designed to remove spot welds from sheet metal by drilling
through the outside panel with little or no damage to the inside panel. Eliminates pilot hole.
Self-centered shallow point. Performs best at low RPM (100-400). Includes Titanium CarboNitride
(TiCN)* coating. Longer life. For use by hand drilling machines.
*TiCN is an excellent all purpose coating that helps tools typically last three to ten times longer
than uncoated tools. For increased life, use with IES Boron Buster #12020.
A premium quality spot weld bit designed to remove spot welds from sheet metal by drilling
through the outside panel with little or no damage to the inside panel. Eliminates pilot hole.
Self-centered shallow point. Performs best at low RPM (100-400). Includes Titanium CarboNitride
(TiCN)* coating. Longer life. For use by hand drilling machines.
*TiCN is an excellent all purpose coating that helps tools typically last three to ten times longer
than uncoated tools. For increased life, use with IES Boron Buster #12020.
A premium quality spot weld bit designed to remove spot welds from sheet metal by drilling
through the outside panel with little or no damage to the inside panel. Eliminates pilot hole.
Self-centered shallow point. Performs best at low RPM (100-400). Includes Titanium CarboNitride
(TiCN)* coating. Longer life. For use by hand drilling machines.
*TiCN is an excellent all purpose coating that helps tools typically last three to ten times longer
than uncoated tools. For increased life, use with IES Boron Buster #12020.
A premium quality spot weld bit designed to remove spot welds from sheet metal by drilling
through the outside panel with little or no damage to the inside panel. Eliminates pilot hole.
Self-centered shallow point. Performs best at low RPM (100-400). Includes Titanium CarboNitride
(TiCN)* coating. Longer life. For use by hand drilling machines.
*TiCN is an excellent all purpose coating that helps tools typically last three to ten times longer
than uncoated tools. For increased life, use with IES Boron Buster #12020.
A premium quality spot weld bit designed to remove spot welds from sheet metal by drilling
through the outside panel with little or no damage to the inside panel. Eliminates pilot hole.
Self-centered shallow point. Performs best at low RPM (100-400). Includes Titanium CarboNitride
(TiCN)* coating. Longer life. For use by hand drilling machines.
*TiCN is an excellent all purpose coating that helps tools typically last three to ten times longer
than uncoated tools. For increased life, use with IES Boron Buster #12020.
A premium quality spot weld bit designed to remove spot welds from sheet metal by drilling
through the outside panel with little or no damage to the inside panel. Eliminates pilot hole.
Self-centered shallow point. Performs best at low RPM (100-400). Includes Titanium CarboNitride
(TiCN)* coating. Longer life. For use by hand drilling machines.
*TiCN is an excellent all purpose coating that helps tools typically last three to ten times longer
than uncoated tools. For increased life, use with IES Boron Buster #12020.
A premium quality spot weld bit designed to remove spot welds from sheet metal by drilling
through the outside panel with little or no damage to the inside panel. Eliminates pilot hole.
Self-centered shallow point. Performs best at low RPM (100-400). Includes Titanium CarboNitride
(TiCN)* coating. Longer life. For use by hand drilling machines.
*TiCN is an excellent all purpose coating that helps tools typically last three to ten times longer
than uncoated tools. For increased life, use with IES Boron Buster #12020.
A premium quality spot weld bit designed to remove spot welds from sheet metal by drilling
through the outside panel with little or no damage to the inside panel. Eliminates pilot hole.
Self-centered shallow point. Performs best at low RPM (100-400). Includes Titanium CarboNitride
(TiCN)* coating. Longer life. For use by hand drilling machines.
*TiCN is an excellent all purpose coating that helps tools typically last three to ten times longer
than uncoated tools. For increased life, use with IES Boron Buster #12020.
A premium quality spot weld bit designed to remove spot welds from sheet metal by drilling
through the outside panel with little or no damage to the inside panel. Eliminates pilot hole.
Self-centered shallow point. Performs best at low RPM (100-400). Includes Titanium CarboNitride
(TiCN)* coating. Longer life. For use by hand drilling machines.
*TiCN is an excellent all purpose coating that helps tools typically last three to ten times longer
than uncoated tools. For increased life, use with IES Boron Buster #12020.
A premium quality spot weld bit designed to remove spot welds from sheet metal by drilling
through the outside panel with little or no damage to the inside panel. Eliminates pilot hole.
Self-centered shallow point. Performs best at low RPM (100-400). Includes Titanium CarboNitride
(TiCN)* coating. Longer life. For use by hand drilling machines.
*TiCN is an excellent all purpose coating that helps tools typically last three to ten times longer
than uncoated tools. For increased life, use with IES Boron Buster #12020.
A premium quality spot weld bit designed to remove spot welds from sheet metal by drilling
through the outside panel with little or no damage to the inside panel. Eliminates pilot hole.
Self-centered shallow point. Performs best at low RPM (100-400). Includes Titanium CarboNitride
(TiCN)* coating. Longer life. For use by hand drilling machines.
*TiCN is an excellent all purpose coating that helps tools typically last three to ten times longer
than uncoated tools. For increased life, use with IES Boron Buster #12020.
A premium quality spot weld bit designed to remove spot welds from sheet metal by drilling
through the outside panel with little or no damage to the inside panel. Eliminates pilot hole.
Self-centered shallow point. Performs best at low RPM (100-400). Includes Titanium CarboNitride
(TiCN)* coating. Longer life. For use by hand drilling machines.
*TiCN is an excellent all purpose coating that helps tools typically last three to ten times longer
than uncoated tools. For increased life, use with IES Boron Buster #12020.
A premium quality spot weld bit designed to remove spot welds from sheet metal by drilling
through the outside panel with little or no damage to the inside panel. Eliminates pilot hole.
Self-centered shallow point. Performs best at low RPM (100-400). Includes Titanium CarboNitride
(TiCN)* coating. Longer life. For use by hand drilling machines.
*TiCN is an excellent all purpose coating that helps tools typically last three to ten times longer
than uncoated tools. For increased life, use with IES Boron Buster #12020.
A premium quality spot weld bit designed to remove spot welds from sheet metal by drilling
through the outside panel with little or no damage to the inside panel. Eliminates pilot hole.
Self-centered shallow point. Performs best at low RPM (100-400). Includes Titanium CarboNitride
(TiCN)* coating. Longer life. For use by hand drilling machines.
*TiCN is an excellent all purpose coating that helps tools typically last three to ten times longer
than uncoated tools. For increased life, use with IES Boron Buster #12020.
A premium quality spot weld bit designed to remove spot welds from sheet metal by drilling
through the outside panel with little or no damage to the inside panel. Eliminates pilot hole.
Self-centered shallow point. Performs best at low RPM (100-400). Includes Titanium CarboNitride
(TiCN)* coating. Longer life. For use by hand drilling machines.
*TiCN is an excellent all purpose coating that helps tools typically last three to ten times longer
than uncoated tools. For increased life, use with IES Boron Buster #12020.
A very popular replacement bit for some pneumatic spot weld removal tools like Spottle and
Spitznagel. Top quality replacement drill bits. Includes Titanium CarboNitride (TiCN)* coating.
Longer life.
*TiCN is an excellent all purpose coating that helps tools typically last three to ten times longer
than uncoated tools. For increased life, use with IES Boron Buster #12020.
A very popular replacement bit for some pneumatic spot weld removal tools like Spottle and
Spitznagel. Top quality replacement drill bits. Includes Titanium CarboNitride (TiCN)* coating.
Longer life.
*TiCN is an excellent all purpose coating that helps tools typically last three to ten times longer
than uncoated tools. For increased life, use with IES Boron Buster #12020.
A very popular replacement bit for some pneumatic spot weld removal tools like Spottle and
Spitznagel. Top quality replacement drill bits. Includes Titanium CarboNitride (TiCN)* coating.
Longer life.
*TiCN is an excellent all purpose coating that helps tools typically last three to ten times longer
than uncoated tools. For increased life, use with IES Boron Buster #12020.
A very popular replacement bit for some pneumatic spot weld removal tools like Spottle and
Spitznagel. Top quality replacement drill bits. Includes Titanium CarboNitride (TiCN)* coating.
Longer life.
*TiCN is an excellent all purpose coating that helps tools typically last three to ten times longer
than uncoated tools. For increased life, use with IES Boron Buster #12020.
A very popular replacement bit for some pneumatic spot weld removal tools like Spottle and
Spitznagel. Top quality replacement drill bits. Includes Titanium CarboNitride (TiCN)* coating.
Longer life.
*TiCN is an excellent all purpose coating that helps tools typically last three to ten times longer
than uncoated tools. For increased life, use with IES Boron Buster #12020.
Made of high speed steel for superb durability. 135° Split Point prevents the bit from walking. Long life. Will not break under normal use.
For best results, use with #12020 IES Boron Buster
Other Double Ended Drill Bit sizes available:
Made of high speed steel for superb durability. 135° Split Point prevents the bit from walking. Long life. Will not break under normal use.
For best results, use with #12020 IES Boron Buster
Other Double Ended Drill Bit sizes available:
A drill bit designed to cut spot welds from Boron Steel! The Boron Buster
Carbide Spot weld Bit has an AlTiN coating (Aluminum Titanium Nitride)
that creates a protective oxide layer that keeps it hardness at higher
temperatures and also improves lubricity. Tools coated in AlTiN typically last
3 - 10 times longer than uncoated tools. Comes with a “Tri-flute” head and
3 flats on shank that prevents turning in the chuck,and can be used in most
conventional electric and pneumatic drills.
Carbide bits are brittle and may break due to the angle, pressure and speed being exerted by
the operator. We will not warranty broken bits.
Made of high speed steel for superb durability. 135° Split Point prevents the bit from walking. Long life. Will not break under normal use.
For best results, use with #12020 IES Boron Buster
Other Double Ended Drill Bit sizes available:
Made of high speed steel for superb durability. 135° Split Point prevents the bit from walking. Long life. Will not break under normal use.
For best results, use with #12020 IES Boron Buster
Other Double Ended Drill Bit sizes available:
Made of high speed steel for superb durability. 135° Split Point prevents the bit from walking. Long life. Will not break under normal use.
For best results, use with #12020 IES Boron Buster
Other Double Ended Drill Bit sizes available:
Made of high speed steel for superb durability. 135° Split Point prevents the bit from walking. Long life. Will not break under normal use.
For best results, use with #12020 IES Boron Buster
Other Double Ended Drill Bit sizes available:
